Standing Seam Copper Roofing

If you are thinking of installing a standing seam copper roofing, you should first research the steps you will need to take. If you find out the proper steps, the installation process should go much smoother.

While some of the steps you should take when installing a standing seam copper roofing are listed here for your convenience, you should consult with a professional before you try to do this yourself.

If your budget allows for it, you may want to hire a reputable company to install your standing seam copper roofing. If not, make sure that you have a good understanding before you begin.

• Apply copper – The copper is directly applied on the top of two layers of underlayment. An ice and water barrier straight on top of the decking and a slip sheet or rosin paper on the top will help with the installation of the copper panels.
• Insert the clips – Stainless steel clips should be screwed into the deck every 12 to 24 inches in the middle. Then, the panels slide into clips and provide a tight lock.

After the standing seam copper roofing is installed, it will gradually change over the next two years. First, it will turn a brownish hazy color. Gradually, it will get a green hue to it that will stay with I for the duration of the time it is on your roof.

If you are planning on installing a copper roof, you may be surprised to find out that there are a vast number of copper roofing supplies available to you.