$89

End Wall-Pitch Change Flashing (Copper)

End Wall-Pitch flashing is used where a change in roof slope occurs or where the roof terminates at an upper slope wall, dormer or fireplace.  100% Quality Copper! Sold in TEN (10) ft. lengths. Profile – 5 1/2″ x 4 1/4″ x 7/16″

More Info
$230

Valley Flashing (Copper)

Valley flashing is used in the valley areas where (2) roof slopes meet.  100% Quality Copper! Sold in TEN (10) ft. lengths. Profile – SEE Diagram in extra-large view above…

More Info
 
$39

Continious Cleat Flashing (Copper)

Continious Cleat flashing is used in conjunction with endwall flashing and peak flashing.  This is for an alternative to the bottom hem of a panel to secure the endwall or peak flashing to the roof system.  Continious Cleat is also used in short course areas.  100% Quality Copper! Sold in TEN (10) ft. lengths. Profile - 2 1/4″ x 5/8″ […]

More Info
$10

Hip and Ridge Shingle/Flashing (Copper)

Hip and Ridge interconnects to secure roof shingles at both the hip and ridge locations, preventing water from entering the roofing system. 100% Quality Copper! Sold in 12″ inch lengths. Profile - 5 1/2″ x 5 1/2″ (SEE Diagram in extra-large view above…)

More Info
 
$70

Peak Flashing (Copper)

Peak Flashing is used to finish and secure roof shingle panels where the roof slopes up and terminates, with no ridge or wall. 100% Quality Copper! Sold in TEN (10) ft. lengths. Profile - 5 1/4″ x 4.0″ (SEE Diagram in extra-large view above…)

More Info
$498

Flat Stock – Rolls (Copper)

Copper Rolls available for special metal bends and cuts not covered by our standard manufactured pieces. (i.e. fireplace saddles, flat vally connections, etc…) Roll Size:  24″ in. W x 30′ ft. L Due to the validity of current raw copper commodity pricing – pricing can vary daily.  All prices will be verified in written quotations and […]

More Info
 
$73

Eave Drip Edge (Copper)

Eave Drip Edge flashing is used as a starter at the roof eave to connect and secure field panels to the roofing system. 100% Quality Copper! Sold in TEN (10) ft. lengths. Profile – 4″ x 2″

More Info
$89

Rake Edge Flashing (Copper)

Rake Edge flashing is used on rake edge/gable edge for start and finish of roof field panels. 100% Quality Copper! Sold in TEN (10) ft. lengths. Profile – 4″ x 2 1/4″

More Info
 
$89

Sidewall Flashing – Roof to Wall (Copper)

Side Wall (Roof to Wall) flashing is used to divert water down the roof slope where the roof field panels connect to a wall.  This piece can also be used for flashing skylights, chimneys, etc… 100% Quality Copper! Sold in TEN (10) ft. lengths. Profile – 4 3/8″ x 3 1/2″

More Info
$126

Front Edge Chimney Flashing (Copper)

While everyone else ignores their chimney, you will make them rethink that. Front Edge Chimney Flashing comes in Copper.  Please select the dimensions for your application from the options dropdown.

More Info
 

CopperRoofing.net CopperChimneyCaps.net